Ballistol Robal Solo Mil 65ml

The proven barrel cleaner for all weapons

• Automatically dissolves tombac, copper, zinc and lead smears in the barrel
• Neutral against steel, nickel and chrome
• Improves shooting precision when bullet smearing was the cause

Supports the removal of MoS2 films from coating residues

Proven and unsurpassed even in tough military use!

The better is the enemy of the good! Therefore

Robla Solo further developed and replaced by Robla Solo MIL.

Due to the excellent test results of the

Bundeswehr Institute of Defense Science will be

Robla Solo MIL now used even in special forces.

Robla Solo MIL consists of a special

Combination with ammonia.

Through these are not only smearing of copper,

Tombak and zinc dissolved, but also lead, the enemy

No. 1 for the precision of the gun.

Steel, chromium and nickel are replaced by Robla

Solo MIL not attacked.

Application:

In case of metal deposits Robla Solo MIL in the areas marked with

a cork or rubber stopper (available e.g. in

pharmacies or hardware stores)

enter barrel closed on one side and

several hours, in case of extreme smearing on the

best overnight, leave to take effect.

Always fill the barrel to the brim.

In the case of less smearing, it is sufficient to apply several

Pull through Robla Solo MIL impregnated tow,

like Sucol / Sucolin from BALLISTOL-KLEVER,

or VFG felt plugs.

Never leave the barrel lying around for a long time,

when it is only moistened with Robla Solo MIL.

Contained ammonia otherwise evaporates, the remaining

Water in combination with organic salts can

then be the cause of pitting corrosion.

The barrel completely filled with Robla Solo MIL

can be safely stored overnight.

Green to blue color shows dissolved copper and

Tombak on, lead and zinc go colorless into solution.

Then dry the barrel several times

and spray with BALLISTOL or Gunex.

After dry swiping, the barrel must be

must be oiled, otherwise pitting corrosion may occur.

can occur in the inner running surface.